⒈ operation of the machine can not stand in front of the operator, so as to avoid accidental injury and operation personnel. In the feed when the material with metal impurities and the operation of small tools such as damage to the machine's hard material dropped into the barrel. No gloves are allowed in the operation of rotating machines in case of injury.
2. Check and add the reducer, air compressor lubricating oil, check the lubrication of the mechanical transmission parts. Avoid dry operation damage machine and make noise.
⒊ boot operation must first check the wiring of the power lines are disconnected, leakage; Check whether the equipment is damaged or not. Ensure that all parts are safe and normal before starting, so as not to affect production and accidents.
⒋ the forming temperature, the cooling air temperature and the blow-swell ratio, the film turbidity increased, the glossiness decreased;
⒌ die mouth evenly uniform, you can wear gloves slowly pulling the tube blank, while the end of the Tube billet closed, micro-open air intake control valve, so that it from the core center hole into a small amount of compressed air, and then carefully lead the stabilization of the bubble frame, the human character plate, and wear into the traction roller, guide roller until the roll (such as to pressure flower roller)
⒍ The compressed air pressure of tube billet should be suitable, which can not rupture the tube billet, but also ensure the symmetry and stability of the membrane tube, and ensure the production of the quality relatively.
⒎ cleaning extruder and die mouth can use copper knife, stick or compressed air cleaning, but avoid damage screw and screw smooth surface.
8. Lesbian work, if long hair must tie up, put on the work cap. Prevent the risk of involvement